This page provides the latest firmware versions for Cobalt Digital's COMPASS® 9000 series cards and Fusion3G® 9900 series cards for openGear®, as well as other Cobalt products as listed.
Cobalt recommends the latest version of our openGear® control software DashBoard™.
For instructions on using DashBoard™ to update the firmware of a card, please consult our firmware update guide.
Fusion3G® 9900 Series Firmware
Some Fusion3G® models use either Type A or Type B firmware shown below. See Selecting the Proper Upgrade Type for Your Fusion3G® Card before selecting firmware below.
|9901||Revision 6867||2/25/2013||9901_rev_6867_Type A_firmware.bin|
|9921||Revision 6867||2/25/2013||9921_rev_6867_Type A_firmware.bin|
|9931||Revision 6867||2/25/2013||9931_rev_6867_Type A_firmware.bin|
|9985||Revision 6867||2/25/2013||9985_rev_6867_Type A_firmware.bin|
OGCP-9000 / WinOGCP Firmware
Keep your OGCP-9000 Control Panel or WinOGCP Virtual Control Panel up to date by downloading the latest firmware listed below. (Firmware does not include option +LM. If your Control Panel is not currently licensed for Loudness Metering, it needs this license after the firmware upgrade to perform Audio Loudness Metering.)
Upgrading SpotCheck® is seamless. An upgrade retains all prior licensing, settings, logins, and configurations, as well as access to historical data/logs. Disruption during firmware upload is typically less than a few seconds.