9021 Standard Definition A/D Analog Composite, Y/C, Component to 10-bit SDI

  • Details
  • Click to view

The 9021 is an analog to 10 bit SDI converter. The 9021 accepts composite, Y/C and component YPbPr analog input signals and provides an SMPTE 259M-C 270 Mbit SDI output. Differential inputs are included for common mode noise rejection.

A 4, 3 or 2-line comb or notch filter is user-configurable for Y/C separation in composite mode. All modes have 2X 8:4:4 input oversampling. An output jitter VCXO reduces 270 Mbit jitter down to 2Hz. Full video proc control with user memory allows adjustment of white level, color gain, and color phase.

Rear modules are sold separately as RM-9021-X for the 10-slot 8310 openGear™ frame, and RM20-9021-X for the 20-slot 8321 openGear™ frame. Also available is the RM20-9021-A/S high density split rear module (5 BNCs per module) for the 20-slot frame.

Standard Features

Composite, component YPbPr and Y/C inputs Supports component BetaCam™, MII™ and SMPTE/N10
Differential analog video inputs for power hum rejection 10-bit A to D and digital video path
User selectable (on/off) 75 ohm termination 4 or 3-line adaptive comb filter for composite mode
Seven 270 Mbit SDI outputs Internal color bar generator
User proc. configuration control Manual or automatic input gain control
Remote monitoring via DashBoard™ software or OGCP-9000 remote control panel Five year warranty

Specifications

Input
Composite, Y/C or component (YPbPr) 		Output
Seven SDI SMPTE 259M-C
Input Type
Differential - all inputs 		Analog Gain
Auto or manual mode
Output Jitter
< 0.14 UI measured with color bar input 		A/D Process
8:4:4 2X over sampled
Frequency Response
5 MHz ± 0.25 dB 		SNR
> 52 dB
Comb Filter
4, 3 or 2-line adaptive / non-adaptive User selectable 		Power
7 watts
Size
12.9" x 3" (330mm x 76mm)
For use in openGear™ frames

Diagrams

Click to view diagram
Block Diagram
Block Diagram
 		RM20-9021-A
RM20-9021-A
 		RM20-9021-A/S
RM20-9021-A/S

Ordering Information

  • 9021 Standard Definition A/D (Composite, Y/C, or Component Input) to 10-bit SD-SDI
  • RM20-9021-A 8321 Frame Rear I/O Module (Standard Width) Composite, Component and Y/C Inputs, 7 x Converted SDI Outputs
  • RM20-9021-A/S 8321 Frame Rear I/O Module (Split) Composite In, 4 SDI Outputs (Not available for 8310 openGear™ frame)

Rear modules also available for 8310 10-slot openGear™ frame (RM-XXXX-X), except where noted.