9066 Upconverter with Analog/SDI Input, Audio Embed/De-Embed, Frame Sync, Timecode and Closed Caption Support

  • Details
  • Click to view

The 9066 offers upconversion (including analog-to-digital conversions using 12-bit conversion depth), SD-SDI and analog video inputs, video proc, full audio embed/de-embed, crosspoint, and level control (with analog and AES discrete audio inputs), and frame sync with video/audio offset. The upconverter allows upconversion to several HD formats, or can pass SD video without conversion.

The 9066 also provides AFD functions that detect the incoming AFD code, allow independent custom ARC to be applied for each incoming AFD code, and set the desired AFD code to be inserted on the output, even if there is no code detected on the input.  Closed captions and timecode are preserved through up conversions.  CC data is decoded from line 21 and inserted into the SDI stream on a user-selectable line. The 9066 provides full user remote and card-edge proc control (with user memory) that allows adjustment of gain, offset, saturation/hue, audio levels, audio routing, frame sync, and many other controls.  Factory presets enable a return to factory settings.

9066 Options

  • Audio Mixer (+AMx)
  • Loudness Meter (+LM)
  • Linear Acoustic Upmixer (+UM)
  • LTC In/Out (+LTC)

Standard Features

SD analog and digital inputs Differential analog video inputs for power hum rejection
5-Line adaptive comb filter for SD-Composite mode Upconversion and aspect ratio conversion
Detail enhancement and noise reduction Selectable safe action, safe title, and center cross overlays
Analog and AES audio inputs and AES output 24-bit analog audio conversion to AES
24-bit audio embedding or de-embedding Audio channel mapping, downmixing, and level control
Audio offset adjustment for lip-sync alignment Frame sync with up to 13 frames of user adjustable delay
Closed captioning support and flexible timecode processing AFD code insertion and AFD ARC control
16 user presets Remote control/monitoring via Dashboard ™ software or OGCP-9000 remote control panels
Timecode insertion/conversion. +LTC option allows LTC input/output on shared port, with bi-directional conversion between VBI and LTC on RS-485 or any audio I/O Five year warranty

Specifications

Electrical
Power: 23 watts 		HD/SD-SDI Input
Number of Inputs: 1
Standard: SMPTE 292 and 259M
Return Loss: >15 dB at 5 MHz - 1.485 GHz
Analog Video Input
HD Standard: YPbPr or RGB SMPTE
SD Standard: Composite, Y/C or Component
(YPbPr BetaCam™, MII™ or
SMPTE/N10)
Impedance: 75 Ω
 AES Input
Number of Inputs: 16-Ch unbalanced BNC
Impedance: 75 Ω
Input Level: 0.1 V to 2.5 V p-p
(5 V p-p tolerant)
Resolution: 24-bit
Analog Audio Input
Number of Inputs: 8-Ch balanced
Signal Level: up to +24 dBu
Sample Rate: 48 kHz

 Reference Video Input
Number of Inputs: 2 looping (openGear® frame)
Standard: Tri-level sync (SMPTE 274) and
black burst (NTSC and PAL)
Processing
A/D Converson: HD: 4:4:4 SD: 8:8:8
Quantization: 12-bit A to D and 10-bit video
data path
SD Comb Filter: 5-line adaptive
Freq. Response: HD: Y - 0-25 MHz +/- 0.3 dB
HD: Pb, Pr 0-13.5 MHz +/-0.3 dB
SD: 5.2 MHz +/- 0.25 dB
 AES Output
Number of Outputs: 16-Ch unbalanced BNC
Impedance: 75 Ω
Sample Rate: 48 kHz
Resolution: 24-bit
HD-SDI Output
Number of outputs: 2
Standard: SMPTE 292 and 259M
Signal Level: 800 mV nominal
Return Loss: >15 dB at 5 MHz - 270 MHz
>12 dB at 270 MHz - 1.485 GHz
Jitter: HD: < 0.15 UI
SD: < 0.10 UI
Embedded Audio: 16-Ch SD/HD

Ordering Information

  • 9066 Upconverter with Analog/SDI Input, Audio Embed/De-Embed, Frame Sync, Timecode and Closed Caption Support
  • RM20-9066-A 8321 Frame Rear I/O Module (Standard Width) Analog and Digital Video Input, 4 AES In/Out BNCs, and 2 SDI Output BNCs
  • RM20-9066-B 8321 Frame Rear I/O Module (Standard Width) Analog and Digital Video Input, 4 Analog Audio Inputs, and 2 SDI Output BNCs
  • RM20-9066-C 8321 Frame Rear I/O Module (Double Width) Analog and Digital Video Input, 2 AES In BNCs, 4 AES In/Out BNCs, 8 Analog Audio Inputs, and 2 SDI Output BNCs
  • RM20-9066-D 8321 Frame Rear I/O Module (Double Width) Digital Video Input, 4 AES In BNCs, 4 AES In/Out BNCs, 8 AES Out BNCs, and 2 SDI Output BNCs
  • RM20-9066-E 8321 Frame Rear I/O Module (Double Width) Analog and Digital Video Input, 4 AES In BNCs, 4 AES In/Out BNCs, 6 AES Out BNCs, and 2 SDI Output BNCs
  • RM20-9066-F 8321 Frame Rear I/O Module (Double Width) Analog and Digital Video In, 4 AES In/Out BNCs, 8 Analog Audio In, RS-485 LTC / Metadata I/O Port, and 2 SDI Output BNCs
  • RM20-9066-G 8321 Frame Rear I/O Module (Triple Width) Analog and Digital Video In, 8 AES In BNCs, 8 AES Out BNCs, 8 Analog Audio In, and 2 SDI Output BNCs