9084 HD/SD-SDI RGB Color Corrector with YCbCr Video Proc and Frame Sync
- Details
- Click to view
The 9084 is an RGB Corrector with YCbCr proc features and frame sync. It can process HD/SD SDI signals in all formats.
The RGB processing controls provide full offset, gain and gamma adjustments. The YCbCr proc controls provide lift, gain, saturation, phase, white clip (hard and soft), black clip, and color saturation clip. Parameter updates are very smooth and responsive, providing a completely real time feel.
Even though the card provides extensive control of the signal from the RGB perspective, it will continue to pass those signals that fall outside of the RGB gamut. Pluge and YCbCr limit ramp signals pass without modification. When the YCbCr saturation clip is activated, the saturation limiting operation will not affect the color phase.
The frame synchronizer can sync the video signal to any compatible reference, and provides full timing offsets. The frame sync minimum delay is only three lines, and can be disabled for operation in synchronous environments.
The 9084 can be controlled from the card edge menu, DashBoard software, the SNMP agent software in the frame, or the OGCP-9000/CC, a remote control panel designed with a special emphasis for the 9084 Color Corrector.
Rear modules are sold separately as RM-9084-X for the 10-slot 8310 openGear™ frame, and RM20-9084-X for the 20-slot 8321 openGear™ frame. Also available is the RM20-9084-A/S high density split rear module (5 BNCs per module) for the 20-slot frame.
Product Downloads
Standard Features
| Full RGB color corrector (offset, gain, gamma) | Passes all ancillary data, including embedded audio |
| Passes entire YCbCr gamut in unity gain configuration | 10-bit gamma LUT |
| Extended YCbCr proc controls with white hard clip, white soft clilp, black hard clip, and saturation clip | Phase preserved when applying saturation clip |
| One button bypass of color correction for comparison purposes | On-card storage of 16 presets |
| Remote control/monitoring via DashBoard™ software or OGCP-9000/CC remote control panel | Five year warranty |
Specifications
|
Power 7.0 Watts |
HD/SD-SDI Input One Input equalization to 100 meters of Belden 1694 Auto sensing: Yes |
|
HD/SDI-SDI Reclock Outputs Four |
HD/SD-SDI Processed Outputs Four |
|
Formats supported 1080i @ 60Hz, 59.94Hz, 50Hz 1080p @ 30Hz, 29.97Hz, 24Hz, 23.98Hz 1080psf @ 24Hz, 23.98Hz 720p @ 60Hz, 59.94Hz, 50Hz, 30Hz, 29.97Hz, 24Hz, 23.98Hz 625i @ 50Hz 525i @ 59.94Hz |
Embedded Audio Passes through card: Yes Compensation for asynchronous inputs (drops and dupes): No |
|
Frame Sync Delay Minimum: 3 lines Maximum: 3 lines + 1 Frame Delay with FS disabled: > 200 samples |
Additional Frames of Delay HD: 6 SD: 13 |
|
RGB Color Correction RGB Offset Control (one per primary) : -100% to 100% in 0.1% steps RGB Gain Control (one per primary) : 0% to 200% in 0.1% steps RGB Gamma Control (one per primary) : 0.125 to 8.0 in 0.001 steps Controls from three primari |
YCbCr Proc Amp Y Offset (Lift): -100% to 100% in 0.1% steps Y Gain: 0% to 200% in 0.1% steps C Gain (Saturation): 0% to 200% in 0.1% steps Video Gain (affects Y and C): 0% to 200% in 0.1% steps Color Phase: -180 degrees to +180 degrees |
|
YCbCr Clipper Y Black hard clip (values limited at or above): -7.5% to 50% in 0.1% steps Y White hard clip (values limited at or below): 50% to 107.5% in 0.1% steps Y White soft clip (values rolled off at): 50% to 107.5% in 0.1% steps C |
|
Diagrams
Block Diagram
|
RM20-9084-A
|
RM20-9084-A/S
|
Ordering Information
- 9084 HD/SD-SDI RGB Color Corrector with YCbCr Video Proc and Frame Sync
- RM20-9084-A 8321 Frame Rear I/O Module (Standard Width) HD/SD-SDI Input BNCs, 4 HD/SD-SDI Reclocked Output BNCs, 4 HD/SD-SDI Output BNCs
- RM20-9084-A/S 8321 Frame Rear I/O Module (Split) HD/SD-SDI Input BNCs, 2 HD/SD-SDI Reclocked Output BNCs, 2 HD/SD-SDI Output BNC (Not available for 8310 openGear™ frame)
Rear modules also available for 8310 10-slot openGear™ frame (RM-XXXX-X), except where noted.