BBG-1022-2FS
Standalone Dual-Channel Frame Sync with Audio/Video Processing, AES/Analog Audio Embedding/De-Embedding and CVBS I/O
Logo for the BBG-1000 Series
Product Categories
Standalone DevicesFrame Sync / Audio Embed/De-Embed
Frame SynchronizersStandalone Frame Synchronizers
Two independent signal paths of frame sync / audio embedding and de-embedding in a single unit.

The Cobalt® BBG-1022-2FS  3G/HD/SD-SDI Standalone Dual-Channel Frame Sync with Audio/Video Processing, AES/Analog Audio Embedding/De-Embedding and CVBS I/O offers two independent signal paths of frame sync / audio embedding and de-embedding in a single unit.

Advanced frame sync features include per-channel audio delay, audio/video offset, and output rate conversion to and from 23.98/29.97/59.94 to 24/30/60 frame rates. Frame sync can select from multiple reference inputs, with failover to alternate selected sources. Each path can independently use either of two frame references or internal reference. Audio embed adaptive SRC allows asynchronous 48 kHz AES audio to automatically sync with program video 48 kHz timing for glitch-free embedding. Individual, per-pair SRC auto-detects and disables SRC when a Dolby pair is detected on an input pair. Bulk and per-channel audio delay controls easily address lip-sync issues. A convenient input crosspoint can select from up to four SDI inputs to be applied to either of the unit’s two processing paths.

The input crosspoint allows manual or failover selection to alternate inputs on loss of input conditions. For each path, two discrete character burn strings can be inserted on output video, with each string inserted as static text and/or insert only upon LOS. With option +T-SLATE, import of user trouble slate graphics is also supported in addition to standard test pattern insert as an input LOS/quality event marker. Moving-box insertion can serve as a dynamic raster confidence check even when the input video image is static. Included standard is closed captioning absence/presence detection for CEA 608/708 and line 21 SD closed captioning.

With option +ANC, the 9922-FS offers full VANC/HANC ancillary data packet de-embedding and embedding for 3G/HD/SD-SDI streams. The easy to use interface allows direct access to DID and SDID locations to extract or insert user data such as camera PTZ, SCTE 104, closed-captioning read/insert, GPI/GPO via ANC, or other specialized user payloads. Data can be extracted and inserted within the card, (Bridge mode), or inserted and/or extracted to and from external interface via serial or IP interfaces.

Option +TTS provides high-quality Text-To-Speech synthesis, directly converting EAS text to digital audio speech with no baseband signal breakouts or add-ons. It interfaces with industry standard Windows Share folder systems to receive non-proprietary text, XML, or similar plain text files, and converts and inserts realistic human-voice audio into user-configured audio channels. Option +EAS provides the ideal solution for keying Emergency Alert System (EAS) text crawls in the active video. Option +EAS directly converts serial crawl text data from EAS generators (such as Sage™ or Dasdec™) to a keyed scrolling text insertion. User-configurable fill background color and text size can be correlated to event severity.

Preset save/load allows saving custom settings while allowing one-button revert to factory settings. Layered presets allow invoking changes related only to a specific area of concern (audio routing, for example) while not changing any other processing settings or aspects. The BBG-1022-2FS can be remote-controlled using DashBoard™. GPIO allows direct input routing control and status monitoring.

The compact standalone form factor allows desktop usage, as well as the 1/3-rack size of the BBG-1022-2FS allowing 3 units to be installed in a 1RU space (an optional mounting tray is available that provides secure mounting of the units to a standard 19” frame).

BBG-1022-2FS

Key Features

Supports all popular formats: 480i, 576i, 720p, 1080i, 1080pSF, 1080p

Two independent processing paths

Dual-path looping setup can provide same program video outputs with different timing offsets as desired

Multi-input RP168 clean switch, with manual selection or GPI controlled input selection. Path inputs can also be sourced from opposite path output with no external patching.

Auto-Changeover can be set to invoke failover for basic input loss. Quality Check option (+QC) provides alert actions on criteria such as black/frozen frame, audio silence, and closed-captioning absence. Threshold and hold-off are user configurable.

Moving-box insertion serves as a dynamic raster confidence check even in cases where the input video image is static

Frame Sync with full H/V offset and manual/LOS video pattern generator

Per-path dual independent burn-in text string insertion allows condition-based insertion (such as basic ID text for valid input and different text message for failover conditions)

Option +TTS provides Text-To-Speech synthesis, directly converting EAS text to high-quality digital audio speech with no baseband signal breakouts or add-on units

Option +ANC adds full user VANC/HANC packet insertion/extraction access to DID/SDID ancillary data such as camera PTZ, SCTE 104, closed captioning, and other specialized user payloads. Multi-mode setup includes Bridge mode (card internal path with bypass bridging) or Insert/Extract modes for insert/extract to or from IP/serial external interfaces. SMPTE 337 embed/de-embed allows serial user data to be embedded and de-embedded over unused embedded audio pairs.

Timecode processing can prioritize, filter for, and convert between specific SMPTE embedded-video or audio LTC, with output/burn-in timecode using selected format

Advanced audio processing allows routing, gain, delay, and flexible mixing as standard features

Full audio crosspoint with delay control and 5.1-to-stereo downmix available for all audio outputs

CVBS analog video I/O and analog/AES embed / de-embed with 4-line Adaptive Comb Filter

Video options include color correction and keying

Pattern generator for each channel can provide raster/test pattern and patterns for LOS failover insertion

Low-power/high-density design – less than 18 Watts

Compact footprint – up to 3 units in a 1RU space. Optional tray provides secure captive-fastener mounting of 3 units in a 1RU tray.

Remote control/monitoring via DashBoard™ software, OGCP-9000 Remote Control Panel, or Web Browser User Interface

Five-Year warranty

Specifications

Power
< 18 Watts. Power supplied by 12VDC AC adapter, universal input (included).

SDI Input/Outputs
Up to (4) 75Ω BNC inputs
Up to (4) 75Ω BNC outputs (selectable as processed SDI Path 1 or Path 2, or selected input reclocked)
SDI Formats Supported: SMPTE 259M, SMPTE 292M, SMPTE 424M
SDI Receive Cable Length: 3G/HD/SD: 120/180/320 m (Belden 1694A)
SDI Return Loss: >15 dB up to 1.485 GHz; >10 dB up to 2.970 GHz
SDI Alignment Jitter: 3G/HD/SD: < 0.3/0.2/0.2 UI
Timing Jitter: 3G/HD/SD: < 2.0/1.0/0.2 UI
Minimum Latency (framesync disabled):
SD: 127 pixels; 9.4 us
720p: 330 pixels; 4.45 us
1080i: 271 pixels; 3.65 us
1080p: 361 pixels; 2.43 us
Note: SDI Return loss and receive cable length are affected by rear I/O module used. Specifications represent typical performance.

CVBS Video Input/Outputs
(1) 75Ω BNC input
(1) 75Ω BNC output (selectable as Path 1 or Path 2 processed output). CVBS output functional only when selected path is carrying SD-SDI.
ADC resolution: 9-bit
Sampling frequency: 27 MHz (2x over-sampling)
Y/C separation: 4 line Adaptive Comb Filter
Freq. Response: ± 0.25 dB to 5.5 MHz
SNR: > 50 dB to 5.5 MHz (unweighted)
Differential Phase: < 1 degree
Differential Gain: < 1%
Nonlinearity < 1%

Discrete Audio Input/Outputs
AES-3id 75Ω inputs (8 pair (16-Ch) max)   AES-3id 75Ω outputs (8 pair (16-Ch) max)
Input AES SRC Range: 32 to 96 kHz
Balanced analog audio inputs (4-Ch max)
Balanced analog audio outputs (4-Ch max)
(I/O conforms to 0 dBFS = +24 dBu)
Analog Output Impedance: < 50 Ω
Analog Reference Level: -20 dBFS
Analog Nominal Level: +4 dBu
Analog Max Output Level: +24 dBu (0 dBFS)
Analog Freq. Response: ±0.2 dB (20 Hz to 20 kHz)
Analog SNR: 115 dB (A weighted)
Analog Analog THD+N: -96 dB (20 Hz to 10 kHz)
Analog Crosstalk: -106 dB (20 Hz to 20 kHz)

Frame Sync Audio/Video Delay
Max offset: 20 frames
Latency (min): 1 frame
Option +DLY Delay (3G/HD/SD): >800 msec / >1580 msec / >9000 msec

User Audio Delay Offset from Video
Bulk delay control: -33 msec to +3000 msec.
Per-channel delay controls: -800 msec to +800 msec

Text Burn-In
(2) independent strings per path supported. Independent insertions controls for enable/disable and enable upon LOS. User controls for text size and H/V position.

GPIO/COMM
(2) GPI configurable to select input routing. (2) GPO configurable to invoke upon input selected. RS-232/485 comm port.

Control/Monitor Interface
Front panel network setup. DashBoard remote control via rear-panel 10/100/1000 Ethernet port.

Frame Reference Input
Looping 2-BNC connection. SMPTE 170M/318M “Black Burst”, SMPTE 274M/296M “Tri-Level”
Return Loss: >35 dB up to 5.75 MHz

Physical
Dimensions (WxHxD): 5.7 x 1.4 x 14.7 in (14.5 x 3.5 x 37.3 cm) Dimensions include connector projections.
Weight: 6 lb (2.8 kg)
Note: Per-path frame reference offers independent per-path controls (such as video delay offset).
However, all paths must be locked to the same selected reference selection (e.g., EXT REF used
for each path).

Diagrams

Block Diagram

Rear Panel

Rear I/O Modules

The BBG-1022-2FS is available with the following rear-panel I/O configurations. These rear panel modules/layouts are not swappable.

BBG-1022-2FS-B

BBG-1022-2FS-B

  • (4) 3G/HD/SD-SDI Input BNCs
  • (4) 3G/HD/SD-SDI Output BNCs
  • (1) 3G/HD/SDI Output BNC (with relay bypass failover)
  • (1) GPIO/COMM RJ-45 connector
BBG-1022-2FS-C

BBG-1022-2FS-C

  • (1) CVBS Video In BNC
  • (2) AES In BNCs
  • (2) Balanced Analog Audio Inputs
  • (1) 3G/HD/SDI Output BNC
  • (1) CVBS Video Out BNC)
  • (2) AES Out BNCs
  • (2) Balanced Analog Audio Outputs
BBG-1022-2FS-D-DIN

BBG-1022-2FS-D-DIN

  • (4) 3G/HD/SD-SDI Inputs
  • (2) Balanced Analog Audio In
  • (6) AES Inputs
  • (4) 3G/HD/SDI Outputs w/ (1) relay protect
  • (4) AES Outputs
  • GPIO/COMM (RJ-45 connector). (All coaxial connectors DIN 1.0/2.3)
BBG-1022-2FS-D-HDBNC

BBG-1022-2FS-D-HDBNC

  • (4) 3G/HD/SD-SDI Inputs
  • (2) Balanced Analog Audio In
  • (6) AES Inputs
  • (4) 3G/HD/SDI Outputs w/ (1) relay protect
  • (4) AES Outputs, GPIO/COMM (RJ-45 connector). (All coaxial connectors HD-BNC)
Options

Software Options

+2FS

Dual-Channel Software Option

Dual-channel software option available for the following models: 9922-FS, BBG-1000 series standalone/desktop BBG-1022-FS.

+LTC

Audio LTC Option

LTC RS-485/Audio Input/Output Option

+COLOR

Color Correction Option

Provides full RGB color corrector (offset, gain, gamma) with extended YCbCr proc controls with white hard clip, white soft clip, black hard clip, and saturation clip.

+ANC

Ancillary Data Processing Software Option

Option +ANC offers full VANC/HANC ancillary data packet de-embedding and embedding for 3G/HD/SD-SDI streams. The easy to use interface allows direct access to DID and SDID locations to extract or insert user data such as camera PTZ, SCTE 104, closed-captioning read/insert, GPI/GPO via ANC, or other specialized user payloads.

+SCTE104

SCTE 104 Insertion Option

SCTE 104 Insertion Option

+SCTE104-FAST

Frame-Accurate SCTE 104 Trigger Insertion Option

Frame-Accurate SCTE 104 Trigger Insertion Option

+KEYER

Keyer Software Option

Option +KEYER provides keying using independent SDI inputs for key and fill signals. A separate preview SDI output is provided for observing key results before applying to program video output. Available in standard and 4K.

+QC

Quality Check Option

Option +QC allows failover to alternate inputs based on user-definable criteria such as black/frozen frame or audio silence. Two discrete character burn strings can be inserted on output video, with each string inserted as static text and/or insert only upon LOS. Import of user trouble slate graphics is also supported in addition to standard test pattern insert as an input LOS marker.

+CQS

Clean and Quiet Switching Software Option

+TTS

Text-To-Speech Option

Option +TTS provides a complete 21CVAA text-to-speech generation / audio insertion solution for embedded or discrete audio systems, offering an integrated solution for 21CVAA Text-to-Speech Generation and audio insertion.

+2L-SPAN

Spanish-language add-on library option

Add Spanish-language upgrade (add-on to option +TTS; option +TTS required)

+EAS

Emergency Alert System Text Crawl Generation Option

Option +EAS – available on a range of Cobalt Digital products – is the ideal solution for keying Emergency Alert System (EAS) text crawls in the active video and inserting station identification logos.

+T-SLATE

Trouble Slate Import Software Option

Option +T-SLATE allows uploading of up to three different user trouble slate graphic file to the card or device. When loaded, any of the graphics can be loaded using automated insertion controlled by GPI or other user-definable events (such as loss of closed captioning, frozen video or other detectable events) offering fully automated insertion for numerous conditions when used in conjunction with +QC Quality Check Option.

+LOGO

Logo Insertion Software Option

Option +LOGO allows uploading of up a user graphics file (such as an ID bug) to the card or device. When loaded, the graphic can be loaded using automated insertion controlled by GPI or other events (such as a GPI insertion signal for periodic station ID).

+DLY

Expanded Frame Sync Delay Option

Expanded Frame Sync Delay Option +DLY allows frame sync frame delay of >800 msec / >1580 msec / >9000 msec (3G/HD/SD).

Hardware Options

BBG-1000-PS

BBG-1000-TRAY

Product Downloads