9412-OE 4K/3G/HD/SD-SDI/ASI/MADI Dual-Channel Fiber Optic Receiver with 2 Fiber In/4 BNC Out 2x4 Router

Tabs

Overview

(This product is discontinued. Please see 9410DA-2OE for its replacement.) The 9400-series Coax/Fiber transport cards provide a card-based solution for high-density distribution and multiplexing between discrete coaxial (“BNC”) signals (such as 3G/HD/SD-SDI, ASI, and MADI) and fiber buses. Utilizing the openGear® open-architecture platform, the 9400-series offers scalable incorporation and the easy-to use DashBoard™ setup and control operator interface.

The 9400-series cards offer I/O crosspoints, allowing easy to configure and flexible routing between card inputs and outputs. Up to 10 of any 9400-series cards can be installed in our 20-Slot Frame, offering support for up to 40 BNC input/outputs and 40 fiber input/outputs in a single frame. In addition to SD/HD-SDI support, the cards support a wide range of signals/standards from 5 Mb/s to 3Gb/s. The scalability of the 9400-series offers a high degree of flexibility and density, maximizing economy of both space and costs. Full user remote and card-edge monitor/control allows full card status and control access locally or across a standard Ethernet network.

The 9412-OE offers dual-channel O-to-E conversion, with a 2x4 router crosspoint allowing two fiber input channels (wavelength agnostic) to be routed to any four selected BNC outputs.

Features

Card-based design allows scalability with up to 40 BNC/Fiber interfaces per frame
Full support of SMPTE 424M, 292M, 259M and SMPTE 310M, SMPTE 344M, SMPTE 305M, M2S, DVB-ASI, and MADI standards/formats
Remote control/monitoring via DashBoard™ software, with soft-configurable crosspoint, EQ on/off, and reclock on/off.
Low power/high-density design; only 10 Watts max. per card
2x4 router allows selectable and flexible crosspoint distribution and DA functions on same card
Five year warranty

Diagrams

Specifications

Power
10 watts (max)

General
Tx/Rx Fiber Range
Single-Mode optics; rates thru SD: 40 km (24.8 mi) max
Single-Mode optics; rates thru HD: 24 km (14.9 mi) max
Fiber Connector: LC, ST, SC, or FC
Standards: SMPTE 259M-C, SMPTE 292M, SMPTE 425M, SMPTE 297M, DVB/ASI, HD-SDI (SMPTE 292M), SD-SDI (SMPTE 259M) with EDH, MADI (AES10-2003) (Not compatible with AES-3id (standard AES PCM))

9412 O-E Inputs/Outputs
Input Type: (2) Fiber LC, ST, SC, or FC (connector type must be specified when ordering)
Wavelength: 1100 to 1610 nm
Optical Sensitivity
Pathological 3Gbps: -18 dBm
Pathological HD-SDI: -20 dBm
Output Type: (4) crosspoint BNCs, 75Ω
Output Return Loss: >15 dB up to 1.5 GHz
>10 dB up to 3 GHz
Added Jitter: <0.03 UI under 1 MHz

Rear Module Options

Rear Modules

RM20-9412-B

   • (2) Fiber In (FIBER IN 1 thru 2) (2:4 crosspoint routable to
      BNC outputs)
   • (4) BNC Out (BNC OUT 1 thru BNC OUT 4)
   (All coaxial connectors BNC. FIBER IN 3 thru 4 are NC.)
   (Type LC, ST, SC, or FC fiber termination available; see
   Ordering Information)

Ordering Information

9412-OE 4K/3G/HD/SD-SDI/ASI/MADI Dual-Channel Fiber Optic Receiver (wavelength agnostic) with 2 Fiber In/4 BNC Out 2x4 Router
RM20-9412-B 20-Slot Frame Rear I/O Module (Standard Width) 2 Fiber In, 4 BNC Out
Note: Add fiber connector suffix to part numbers above to specify fiber connection type (LC, ST, SC, FC). (For example, RM20-9412-B fitted with LC connectors is ordered as “RM20-9412-B-LC”.)

Product Downloads