BBG-1090-RTR-MPEG-IP (Discontinued) Streaming IP (MPEG2-TS) Reclocking Distribution Amplifier and Router Standalone Unit

Tabs

Overview

(This product is discontinued. This product is available in openGear® card form 9990-RTR-MPEG-IP.) The BBG-1090-RTR-MPEG-IP offers a compact form-factor standalone solution for providing distribution copies of unicast or multicast IP streams. Unicast streams, by design, have only one destination and cannot easily be monitored by test equipment. To solve this, the BBG-1090-RTR-MPEG-IP provides copies that can easily be sent to multiple destinations for monitoring or other purposes. With the BBG-1090-RTR-MPEG-IP, the originating UDP/RTP stream can be replicated to reach its intended destination, as well as providing ample copies for monitoring or other purposes.

Using its two 1GigE RJ-45 ports, the BBG-1090-RTR-MPEG-IP supports up to 16 inputs, and up to 16 outputs. Each input can be replicated up to eight times. The BBG-1090-RTR-MPEG-IP also includes advanced redundancy protection features, allowing for automatic failover if the primary signal disappears. De-jittering and reclocking features help ensure reliable operation in all conditions and actually “cleans up” inputs with jittery IPGs. The BBG-1090-RTR-MPEG-IP can be remotely controlled and monitored with the free, easy-to-use DashBoard™ setup and control operator interface. (When connected to your network, the BBG-1090-RTR-MPEG-IP appears in DashBoard just like any other device.)

Features

Compact self-contained form with built-in AC power supply
Economical standalone solution provides distribution copies of unicast or multicast IP
streams
Up to 16x16 inputs and outputs using two 1GigE Ethernet ports
De-jittering and reclocking features help ensure reliable operation – even with jittery sources
Easy integration and control/monitoring via DashBoard™ remote control
Five year warranty

Options

Option

+9990RTR-16X16 Upgrades BBG-1090-RTR-8X16-MPEG-IP to model BBG-1090-RTR-16X16-MPEG-IP (adds 8 inputs for a total available of 16 inputs)

TRAY 1 RU Rack Mount Tray (supports up to 3 chassis units)

Diagrams

Specifications

Power
100-250 VAC, 47-63 Hz, 15W

Routing Capacity
Model BBG-1090-RTR-8X16-MPEG-IP: 8 inputs available for routing to up to 16 outputs. Outputs can be on either or both GigE ports.
Model BBG-1090-RTR-16X16-MPEG-IP: 16 inputs available for routing to up to 16 outputs. Outputs can be on either or both GigE ports.
Note: For all models, the two GigE ports each are limited to 8 inputs and 8 outputs per port. Also, replication limit is 8 (i.e., a given input can be replicated only up to 8 copies).

Network I/O
Number of ports: (2) 1GigE RJ-45
IPv4, IPv6, UDP, and RTP
900Mbit/s usable GbE per Rx port
900Mbit/s usable GbE per Tx port
2 Gb/s maximum processing per device
Note: SMPTE-2022 FEC is not supported. FEC packets are discarded at the input and not generated at the output.

Physical
Dimensions (WxHxD): 5.8 x 1.8 x 14 in (14.7 x 4.6 x 35.6 cm) (including component projection)

Ordering Information

BBG-1090-RTR-8X16-MPEG-IP 8x16 Streaming IP (MPEG2-TS) Reclocking Distribution Amplifier and Router Standalone Unit
BBG-1090-RTR-16X16-MPEG-IP 16x16 Streaming IP (MPEG2-TS) Reclocking Distribution Amplifier and Router Standalone Unit

Options:

+9990RTR-16X16 Upgrades BBG-1090-RTR-8X16-MPEG-IP to model BBG-1090-RTR-16X16-MPEG-IP (adds 8 inputs for a total available of 16 inputs)
TRAY 1 RU Rack Mount Tray (supports up to 3 chassis units)

Product Downloads